| Most EasyWorship customers are familiar with using a presenter remote for advancing slides in PowerPoint slide shows. Many remote controls purchased for this purpose use hard coded keyboard Hotkey combinations that work with PowerPoint. EasyWorship requires different Hotkey combinations than PowerPoint. A Programmable presenter remote is the best solution for use with EasyWorship. Below is a list of remote controls that allow the buttons to be programmed to match the Hotkeys for EasyWorship. Recommended Presenter Remotes:
Interlink Remotes:
(http://www.smklink.com/presentation_remotes/index.html)
 VP4450 - RemotePoint Emerald Navigator
(Download Software | Key Settings)
 VP4910 - RemotePoint Jade
(Download Software | Key Settings)
Notes: All of the Interlink wireless presenters listed here have four programmable buttons. The bottom of the wheel on the emerald is an unmarked programmable button
Honeywell Remotes:
(www.powerremote.com) (Programming Instructions)
 PowerPresenter RF - (Download Manual).
Notes:
This remote requires no software to program. It has two programmable buttons and allows for three functions. Each button has its own command. Pressing both buttons allows for a third command. It also includes another button for a laser pointer.
Airturn BT 105-PB4 (Buy Here) (Setup Instructions) 
EasyWorship Hotkeys Page Down = Go Live (Sends song to Live area) Arrow Down = Next Slide Arrow Up = Previous Slide Ctrl+B = Black/UnBlack Screen Ctrl+C = Clear/UnClear Text from Screen Ctrl+L = Logo/UnLogo Left Arrow = Previous Schedule Item Right Arrow = Next Schedule Item Can I use a Remote that cannot be programmed? Yes, some nonprogrammable remotes will work. Changing the hotkeys in EasyWorship is required. Click here for instructions for making these changes. | 
